+86 15757350088 | +86 13511362662
LEARN MORE ABOUT OUR PRODUCTS
— Inner Tank: Duplex stainless steel 2205
— Outer Tank: SUS304
— Insulation layer: 40mm thick high density polyurethane foam
— Bracket: Aluminum Alloy
— Specification: 10-36tubes
Description
The pool collector is a type of non-pressurized solar collector. The only difference is that its core is made of stainless steel with a good corrosion resistance grade. It is not afraid of corrosion from high-salt and high-chlorine water.
|
Inner Tank |
Duplex stainless steel 2205 |
|
Outer Tank |
SUS304 |
|
Insulation layer |
40mm thick high density polyurethane foam |
|
Bracket |
Aluminum Alloy |
|
Specification |
10-36tubes |
|
Rated Working Pressure |
0.5 Bar |
|
Warranty |
5years |
|
Packing |
Standard Export Packing |
|
Payment Term |
TT |
|
Other free services |
Free installation manual in Enalish,put logo on solar collector |
|
Delivery Time |
Delivery time within 10 days after receiving deposit |
Working Principle
The solar thermal collector collects solar energy through solar vacuum tubes to heat the water in the collector. When the intelligent controller detects that the collector temperature T1 is 5 degrees Celsius higher than the water tank temperature T2, the circulation pump automatically starts to bring the hot water in the collector to the water tank, and the cold water enters the solar collector, and the cycle repeats to heat the water in the water tank.
Specialty
The core material has high corrosion resistance and can be used effectively in swimming pools with high salt and high chlorine water.
- KEEP IN TOUCH -
If you have any enquiry about quotation or cooperation, please feel free to email us at Sales@inlightsolar.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
